/
/
/
Installation Of Window Extractor Fan

NewsInformation

Installation Of Window Extractor Fan

Installation Of Window Extractor Fan

Ventilation is a very important factor in measuring a house, among which the ventilation of the bathroom is a top priority. Due to the particularity of the bathroom, the ventilation effect of the bathroom must be attended to with great consideration. Otherwise, it will easily cause the entire house to be filled with bad smells. So how can we correctly install the exhaust fan and what are the installation steps?

 

One suggestion is to try to be as close as possible to the original air duct outlet and comply with the principle of the shortest pipeline and try to be as close as possible to the place where odor or moisture is easy to produce, which is in line with the principle of highest efficiency. It should not be installed directly above the shower area, otherwise, airflow will cause discomfort to the body, and when the temperature is low, the heat loss will be large. Combined with the shape of the ceiling, partitioning, lighting, etc., it is unified in aesthetics. Before installing the fan, carefully check whether the fan is intact, whether the fastener bolts are loose or falling off, and whether the impeller impacts the windshield. Carefully check whether the fan blades or louvers are deformed or damaged during transportation. When installing and selecting the air outlet environment, pay attention that there should not be too many obstacles within 2.5-3m opposite the air outlet.

 

 

When installing the window extractor fan, pay attention to the horizontal position of the fan, and adjust it to ensure that the water level of the fan and the ground is stable. After installation, the motor must not be tilted. When installing the fan, the adjustment bolt of the motor should be in a convenient position for adjustment. The belt is tight. When installing the fan bracket, be sure to make the bracket and the ground level water stably. If necessary, install an angle iron next to the fan to reinforce it. After the fan is installed, check the surrounding tightness. If there is a gap, it can be sealed with a solar panel or glass glue.

 

To ensure the installation to be reliable and firm. The distance between the window extractor fan and the ground is more than 2.3m. The distance between the window extractor fan and the roof must be more than 5cm. Remember to avoid installing the ceiling type exhaust fan with more oil smoke and dust. In many places, you must leave the high-temperature source; wall-type ventilating fans can be used for ventilation in various places, and can also be used for fume extraction; when using a socket to supply power, the power cord of the ventilator should be equipped with a plug that meets safety standards.

 

What’s more, the power cord of the window extractor fan must be grounded and the power of thewindow extractor fan must be connected to the all-pole switch as far as possible. The ceiling must be provided with inspection holes and the gas must be avoided through the open-air channel and backflow of other pyrotechnic equipment channels. Try not to bend the pipe into a V-shape or bell-shaped shape to hinder air circulation and the room must be provided with air intake holes other than the ventilation fan to ensure the entry of fresh air. During operation, spraying water on the body is not advisable. It should also be reminded that window extractor fan must be cut off before the power is removed or cleaned.

 

These are the installation steps of the window extractor fan and some problems that should be paid attention to during the installation process. To install the exhaust fan, it is recommended that a professional teacher be responsible for the installation. However, if there are some minor faults in the later stage, you can directly repair yourself after understanding, saving time and effort.

Back
jinling

CONTACT US

jinling

No.1 Jinling Road, BinJiang Avenue, Jiangmen, Guangdong, China.

jinling

400-833-9012

jinling

jinling@jinlingshan.com.cn

COPYRIGHT   2020 Jinling Exhaust Fan Manufacturing Co., Ltd.   Support: www.300.cn  Jiangmen    粤ICP备11104140号

close
open

CONTACT